CHW-2024A Fully Automatic Stretch Wrapper

FEATURES

Suitable for online wrapping
Automatic PE film cut and clamp system, after finishing wrapping, machine will automatically cutting the film and the tail will be sealed on the pallet perfectly by the brush.
Driven by gears, ensuring stability and smooth operation of the turntable.
Use 7" HMI + PLC program. User-friendly operator panel with GUI interface
Offers manual, automatic modes
Machine use durable roller conveyor which need be linked to infeed & outfeed conveyor also use chain drive.
Turntable speed & film carriage ascent/descent adjustment speed by frequency inverter.
Roller conveyor adjustment speed by frequency inverter.
Not only film wrapping speed can be adjusted but also can set film overlapping range.
Machine have air blowing device at the end, it prevents tail drooping after automatically cutting the film, suitable for the applicaiton on automated storage.
Powered pre-stretch system 200% or 250% option.
Film carriage is designed with a safety anti-pressure plate for protecting employee.
For products weighing less than 750KG or with particularly unstable loads, it is recommended to use top pressure plate to prevent the products being pulled when the film wrapping.
Able to connect to the top sheet dispenser for complete solution. Automatic system for covering the upper surface of the pallet.
Able to connect to the automatic pallet dispenser for robotic palletizing solution.

Model	CHW-2024A
Power Supply	3 phase, 220V/380V/415V, 50/60HZ
Pallet dimensions	L1100~1300 x W1100~1300mm
Weight (include: pallet + product)	750KG~3000KG/pallet
Control system	7" HMI + PLC
Turntable diameter	2000mm
Wrapping height	2100mm / 2400mm
Turntable height	550mm
Turntable speed	5-15 rpm
Durable conveyor spec.	Steel Idler Rollers
Conveyor speed	10~12M
Film carriage speed	0~5 Meter/min. (adjustment by inverter.)
Film specification	PE film, I.D.:76mm, O.D.:250mm, W500mm
Film thickness	17-35micron
Air supply requirements	6kg/cm²
Machine size	L2980 x W2256 x H3305mm
※CHAN Pack reserves the right to modify specification for quality development.

Mechanical & Mechatronic aspect:

Powered pre-stretch system up to 200% or 250% of the film length.
Top pressure plate
Infeed /Outfeed powered roller conveyor
Safety fences
Low stretch film detector with alarm
Continued Wrapping function - After finished troubleshooting, the film holder will be raised to the original break point where to continue wrapping.
90 degree rotation mechanism ( L-turn outfeeding) - the pallet can be moved from the joint conveyor on wrapper.
Hot plate sealer- Hot plate device to fix the final edge of the film during wrapping cycle on the previous turn. The film is cut by means of the hot wire.
Connect to the automatic pallet dispenser

Special needs:

SPECIFICATIONS